Hubbell SEC75RGA Straight Strain Relief Cord Grip 3/4 Npt

Product Description

The HUBBELL WIRING DEVICE-KELLEMS SEC75RGA is a straight strain relief cord grip designed to secure flexible cords and cables at conduit or enclosure entry points. It accepts cable diameters from 0.25 to 0.48 inches and threads into a standard 3/4-inch NPT opening. The body is molded from Nylon 6/6, which resists moisture, mild chemicals, and abrasion. With an overall length of 1.3 inches, the fitting installs in tight spaces without requiring additional clearance. The IP66 ingress protection rating makes it suitable for locations where dust and water exposure are a concern. Electricians install this fitting to prevent cord pullout and protect the cable jacket from sharp conduit edges.

This cord grip is appropriate for general-duty wiring applications in residential, commercial, and light industrial settings. It suits junction boxes, control panels, and equipment enclosures wherever a flexible cord enters through a 3/4-inch NPT knockout. The straight configuration is standard for direct, in-line cord entry. The Nylon 6/6 construction keeps weight low at 0.05 pounds, which matters in high-count panel builds. Licensed electricians typically specify this fitting during rough-in or device installation when code requires secure cord anchorage at box entries.

Key Features

• Accepts cable diameters from 0.25 to 0.48 inches for a range of cord sizes
• 3/4-inch NPT thread fits standard knockout sizes in boxes and enclosures
• Nylon 6/6 body resists moisture, abrasion, and mild chemicals
• IP66 rated for dust-tight and water-jet protection
• Straight conduit type for direct in-line cord entry
• Compact 1.3-inch overall length suits space-constrained installations

Compatibility

Designed as a general-duty straight strain relief cord grip for any enclosure, junction box, or panel with a standard 3/4-inch NPT threaded entry.

Installation Notes

Installation is performed by a licensed electrician in accordance with applicable NEC requirements for cord anchorage and box fill. De-energize the circuit and lock out the panel before opening any enclosure. Thread the SEC75RGA into the 3/4-inch NPT knockout by hand and tighten with an appropriate wrench, being careful not to overtighten the Nylon fitting. Verify the cord jacket is clamped securely so the fitting bears any pull force rather than the terminal connections inside the enclosure.