Hubbell P0759NGY Liquid-tight Conduit Connector 3/4 in

Product Description

The HUBBELL WIRING DEVICE-KELLEMS P0759NGY is a 90-degree liquid-tight conduit connector designed for use with liquid-tight flexible conduit in electrical installations. Constructed from nylon, this insulated fitting uses a compression connection method to create a secure, watertight and dust-resistant seal at the conduit termination point. The 3/4 inch trade size accommodates standard 3/4 inch liquid-tight flexible conduit and is suited for routing conductors through tight routing paths where a 90-degree change of direction is required. Licensed electricians and electrical contractors install this type of fitting in a wide range of commercial and industrial wiring applications.

This connector is appropriate for use wherever liquid-tight flexible conduit terminates at a junction box, enclosure, or motor connection. The 90-degree angle is particularly useful in space-constrained installations where straight connectors cannot be routed without excessive bend radius in the conduit. Typical applications include motor connections, HVAC equipment wiring, pump panels, and outdoor or wet-location enclosures where moisture and dust ingress must be controlled. The watertight and dust-resistant rating makes it suitable for damp and wet location use per NEC requirements.

Key Features

• 90-degree connector angle allows tight-radius routing in confined spaces
• Nylon construction provides corrosion resistance and electrical insulation
• Compression connection type delivers a secure, tool-assisted mechanical grip on liquid-tight conduit
• Watertight and dust-resistant sealing for use in damp and wet locations
• Insulated fitting helps protect against ground faults at the conduit entry point
• 3/4 inch trade size fits standard 3/4 inch liquid-tight flexible conduit

Compatibility

Designed for use with 3/4 inch trade size liquid-tight flexible conduit. Suitable for termination into standard knockout openings sized for 3/4 inch trade size conduit fittings.

Installation Notes

Installation should be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and applicable local codes. De-energize all circuits and lock out power before working on any conduit or enclosure. Hand-tighten the compression nut onto the liquid-tight conduit jacket, then snug with pliers or a strap wrench to achieve a watertight seal without over-tightening the nylon body. Verify the fitting is fully seated and the locknut is secure against the enclosure wall before restoring power.