Hubbell NP82GY 2-gang Duplex Wall Plate Nylon Gray

Product Description

The HUBBELL NP82GY is a 2-gang, 2-duplex receptacle nylon wall plate designed for standard electrical outlet configurations in residential and commercial wiring applications. Built from high-impact, self-extinguishing nylon, it offers a smooth, easy-to-clean gray finish that resists solvents and cleaning solutions. The standard designated size runs 1/8 inch larger than the box opening to provide extra coverage and hide rough cutouts. Overall dimensions are 4.69 inches wide by 4.63 inches tall by 0.25 inches thick. Rated for temperatures from -40 to 85 degrees C, this plate is listed by both UL and CSA, making it suitable for a wide range of installation environments. Licensed electricians are the primary installers of this device.

The NP82GY is suited for use in residential, light commercial, and institutional electrical installations wherever two duplex receptacles are mounted side by side in a standard 2-gang box. Its captive screw feature keeps the mounting screw in place during installation, reducing fumbling at the box. Pre-marked curved corners and reinforcement ribs add both structural durability and a finished appearance. This plate fits standard 2-gang electrical boxes and is appropriate for any application requiring a clean, professional cover over a duplex outlet pair.

Key Features

• Standard size is 1/8 inch larger than the box opening to cover rough or oversized cutouts
• High-impact, self-extinguishing nylon construction for durability in demanding environments
• Smooth gray finish resists solvents and common cleaning solutions
• Captive screw holds mounting screw in place for faster, easier installation
• Reinforcement ribs provide additional structural strength
• UL and CSA listed for broad code compliance

Compatibility

Designed as an OEM-style replacement or new-installation wall plate for standard 2-gang electrical boxes configured with two duplex receptacles.

Installation Notes

Installation is performed by a licensed electrician in accordance with the National Electrical Code (NEC) and applicable local codes. De-energize the circuit at the breaker panel and verify with a voltage tester before working at the box. A standard flathead or Phillips screwdriver is all that is required to secure the captive mounting screw. Do not over-tighten the mounting screw, as nylon plates can crack under excessive torque.