Hougen 3-12234 Annular Cutter 1-1/16 in Hss Weldon

Product Description

The HOUGEN 3-12234 is a high-speed steel annular cutter designed for clean, fast through-holes in mild steel and general steel stock. With a cutter diameter of 1-1/16 inches and a cutting depth of 3 inches, this cutter handles deeper penetrations than standard twist drills without the heat buildup and material waste associated with solid-bit drilling. The Weldon flat shank with two flats provides a positive, slip-free connection to the magnetic drill arbor. The bright, uncoated finish is appropriate for general-purpose steel cutting applications where specialized coatings are not required. Metalworkers, ironworkers, and fabricators use this cutter in magnetic base drills on structural steel, plate, and pipe work.

This cutter is suited for use in structural steel fabrication, ironwork, and general metal fabrication environments. The 3-inch depth of cut makes it useful for thicker plate sections and stacked material applications where a shorter cutter would not reach through. It is compatible with magnetic drill presses and drill press arbors that accept a 3/4-inch Weldon flat shank. Typical applications include beam work, connection plates, and field drilling on structural assemblies.

Key Features

• 1-1/16 inch cutter diameter for precise, consistent hole sizing
• 3 inch cutting depth for penetrating thick plate and stacked material
• High-speed steel construction for durability in mild and general steel cutting
• Weldon flat shank with 2 flats ensures positive drive and prevents slippage in the arbor
• 3/4 inch shank diameter fits standard magnetic drill arbors
• Bright, uncoated finish for general-purpose use without specialized coating requirements

Compatibility

Designed for use with magnetic drill presses and arbors that accept a 3/4-inch Weldon flat shank connection. Suitable for cutting mild steel and general steel stock.

Installation Notes

Installation and use should be performed by qualified metalworkers or fabricators familiar with magnetic drill press operation. Secure the magnetic base firmly to a clean, flat steel surface before operation and verify the arbor set screws engage both Weldon flats fully before starting the cut. Always use cutting fluid or lubricant appropriate for HSS tooling on steel to extend cutter life and control heat. Disconnect power to the drill before changing or securing the cutter in the arbor.