Hougen 12754 Annular Cutter 1-11/16 in Hss Tin

Product Description

The HOUGEN 12754 is a high speed steel annular cutter designed for fast, clean through-holes in ferrous metals. It cuts a 1-11/16 inch diameter hole to a full 2 inches depth of cut, removing only a core slug rather than reducing the full cross-section to chips. The cutter is ground from M2 high speed steel and finished with a titanium nitride (TiN) coating, which reduces friction and extends tool life in production drilling applications. The 3/4 inch Weldon flat shank with two flats locks securely into compatible magnetic drill press arbors, preventing slippage under load. This cutter is a standard tool for licensed metalworking professionals and fabricators.

The HOUGEN 12754 is suited for structural steel fabrication, ironwork, shipbuilding, and general metalworking where standard twist drills are impractical or too slow. Typical applications include drilling bolt holes, conduit entry points, and clearance holes in mild steel, stainless steel, and general steel stock. The 2 inch depth of cut accommodates heavy plate and structural sections. It is commonly used with portable magnetic drill presses on job sites and in fabrication shops.

Key Features

• 1-11/16 inch cutter diameter removes only the core slug for faster, lower-torque drilling
• 2 inch depth of cut handles heavy plate and deep structural sections
• M2 high speed steel construction provides toughness and heat resistance
• TiN coating reduces friction and extends cutting edge life
• 3/4 inch Weldon flat shank with two flats prevents rotation under load
• Rated for mild steel, stainless steel, and general steel stock

Compatibility

Designed for use with magnetic drill presses and annular cutter arbors accepting a 3/4 inch Weldon flat shank. Compatible material applications include mild steel, stainless steel, and general steel as specified by the manufacturer.

Installation Notes

Installation and operation should be performed by qualified metalworking professionals familiar with magnetic drill press safety procedures. Ensure the magnetic drill base is fully energized and seated on a clean, flat surface before beginning a cut. Always use cutting oil or coolant appropriate for the workpiece material to maintain edge life and prevent workpiece distortion. Disconnect power to the drill before changing or inspecting the cutter.