Hougen 12732 Annular Cutter 1in X 2in Hss Tin Weldon

Product Description

The HOUGEN 12732 is a high speed steel annular cutter designed for clean, full-diameter hole cutting in ferrous metals. With a 1-inch cutting diameter and a 2-inch depth of cut, this cutter removes only a narrow ring of material rather than a solid slug, reducing power draw and heat buildup compared to twist drills. The M2 high speed steel construction is finished with a titanium nitride (TiN) coating, which extends cutting life and reduces friction against tough workpiece materials. It fits magnetic drill presses and drill press setups equipped with a 3/4-inch Weldon flat shank interface. Metalworkers and fabricators are the primary installers of this tool.

This annular cutter is suited for production and field work involving mild steel, stainless steel, and general steel fabrication. The 2-inch depth of cut handles most structural steel thicknesses found in steel erection, pipe fitting, and ironwork applications. The Weldon flat shank with two flats locks securely into compatible chuck systems, preventing slippage under the torque loads typical in magnetic drill operation. It is appropriate for both shop use and on-site drilling where a portable magnetic drill is deployed.

Key Features

• 1-inch cutter diameter with 2-inch depth of cut for structural steel applications
• M2 high speed steel construction for durability in ferrous metals
• Titanium nitride (TiN) coating reduces friction and extends tool life
• 3/4-inch Weldon flat shank with 2 flats for positive, slip-resistant chuck engagement
• Compatible with mild steel, stainless steel, and general steel workpieces
• Annular cutting geometry reduces power draw versus solid twist drills

Compatibility

Designed for use with magnetic drill presses and drill stands that accept a 3/4-inch Weldon flat shank. Suitable for cutting mild steel, stainless steel, and general steel.

Installation Notes

Installation of annular cutters is performed by metalworkers, ironworkers, and pipefitters using magnetic drill presses or drill press stands. Secure the Weldon shank fully into the chuck and tighten all set screws against the flats before beginning any cut. Use an appropriate cutting fluid or pilot pin lubricant to manage heat, particularly when cutting stainless steel. Always clamp or mag-lock the drill firmly to the workpiece and confirm the work area is clear before engaging the cutter.