Honeywell VRN2HUPX0000 Pressure Independent Control Valve

Product Description

The Honeywell VRN2HUPX0000 is a pressure-independent control valve designed for hydronic systems. This valve manages flow and temperature simultaneously, adapting to pressure variations automatically. It supports temperature maintenance during system fluctuations, ensuring optimal performance.

• Valve sizes range from one half inch to three inches with female NPT connections.
• Compatible with hot or chilled water, including up to fifty percent glycol blends.
• Incorporates a differential pressure regulator for consistent pressure management.

Product Highlights

The Honeywell VRN2HUPX0000 provides reliable flow control in hydronic applications.

Product Information

Standard Information

• Brand: Honeywell
• MPN: VRN2HUPX0000

Technical Specifications

• Type: Valve Only
• Connection: NPT
• Trim Material: Brass
• Pattern: 2-way
• Size: 3 inches
• GPM: 45 GPM
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: one half inch to three inches with female NPT pipe fittings
• Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or Glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam
• Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: one GPM (one half inch valve) to ninety-five GPM (three inch valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim: Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at one half inch or three quarter inch (DN15 ~ DN20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to three inches (DN80), 18 lb-in (2 Nm) up to three quarters inch (and one inch up to nine GPM)
• Warranty: One year on valves, five years on actuators