Honeywell VRN2HTPX5000 Pressure Independent Control Valve

Product Description

The Honeywell VRN2HTPX5000 is a pressure independent control valve for hydronic systems. This valve combines flow control and temperature regulation in one unit. It features a pressure control cartridge for flow balancing. The valve is capable of managing hot or chilled water, including solutions with up to fifty percent glycol. The design includes a modulating floating electric actuator and is engineered to fail in place. The valve body is made from forged brass with NPT connections.

• Three inch NPT connection.
• Controls flow rates up to forty gallons per minute.
• Compatible with water and glycol solutions.

Product Highlights

This valve effectively regulates flow and provides temperature control for hydronic systems, ensuring efficient operation.

Product Information

Standard Information

• Manufacturer Part Number: VRN2HTPX5000
• Type: Assembly

Technical Specifications

• Connection: NPT
• Trim Material: Stainless Steel
• Pattern: Two-way
• Size: Three inches
• GPM: Forty gallons per minute
• Control Signal: Analog, Floating
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: Half inch to three inches with female NPT fittings
• Body Pressure Rating: Maximum three hundred sixty psi (two thousand five hundred kPa) at two hundred fifty degrees Fahrenheit (one hundred twenty-one degrees Celsius)
• Controlled Medium: Water or glycol solutions up to fifty percent; not for combustible gases, oil, or steam
• Medium Temperature Range: Negative twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (negative thirty degrees Celsius to one hundred twenty-one degrees Celsius)
• Maximum Differential Pressure: One gpm (half inch valve) to ninety-five gpm (three inch valve)
• Close-off Pressure: One hundred psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at half inch or three quarter inch (DN15 ~ DN20)
• Minimum Torque Required: Thirty-five lb-in (four Nm) up to three inches (DN80), eighteen lb-in (two Nm) up to three-quarter inch (and one inch up to nine gpm)
• Warranty: One year on valves, five years on actuators; these actuators available factory-installed