Honeywell VRN2HSSXA100 VRN Series Pressure Regulated Control Valve

Product Description

The Honeywell VRN2HSSXA100 is a pressure-regulated control valve designed for efficient flow and temperature management in hydronic systems. This valve automatically adjusts to maintain consistent temperature levels when piping pressures change. It incorporates a built-in pressure control cartridge for effective flow balancing.

• Compatible with hot or chilled water, including 50% glycol solutions.
• Available in sizes from half an inch to three inches with female NPT connections.
• Features a patented flow control insert for equal percentage flow characteristics.

Product Highlights

The Honeywell VRN2HSSXA100 valve provides seamless integration for hydronic heating and cooling applications.

Product Information

Standard Information

• Brand: Honeywell
• MPN: VRN2HSSXA100

Technical Specifications

• Type: Assembly
• Connection: NPT
• Input Voltage: 24 VAC
• Trim Material: Stainless Steel
• Valve Pattern: 2-way
• Size: 3 inches
• Flow Rate: 35 GPM
• Control Signal: Two Position
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: 1/2 to 3 inches with female NPT fittings
• Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or glycol solutions up to 50%; not suitable for combustible gases, oil, or steam
• Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body Material: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim: Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80); 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)