Honeywell VRN2HSPX9100 Pressure Independent Control Valve Assembly

Product Description

The Honeywell VRN2HSPX9100 is a pressure independent control valve assembly designed for hydronic systems. This assembly features an electric actuator and integrates flow and temperature control effectively. The valve manages flow automatically, ensuring temperature stability even with fluctuating piping pressures.

• Includes a pressure control cartridge for optimal flow balancing.
• Configured with a 3-inch NPT connection and designed for compatibility with water or glycol solutions up to fifty percent.
• Designed for on/off control with a fail-open configuration and has one auxiliary switch.

Product Highlights

This valve assembly is ideal for maintaining system efficiency in hydronic applications and is built to support a range of temperatures and pressure specifications.

Product Information

Standard Information

• Brand: Honeywell
• MPN: VRN2HSPX9100

Technical Specifications

• Type: Assembly
• Connection: NPT
• Trim Material: Stainless Steel
• Pattern: 2-way
• Size: 3 inches
• GPM: 35 GPM
• Control Signal: Two Position
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: 1/2 inches to 3 inches with female NPT pipe fittings
• Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or Glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam
• Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 GPM (1/2 inches valve) to 95 GPM (3 inches valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inches or 3/4 inches (DN15 ~ DN20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80), 18 lb-in (2 Nm) up to 3/4 inches (and 1 inches up to 9 GPM)
• Warranty: 1 year on valves, 5 years on actuators * These actuators available factory-installed.
• Product Status: Active