The Honeywell VRN2HSPX6100 is a pressure independent control valve and actuator assembly made for HVAC applications. This assembly keeps a stable flow of hot or chilled water, even with up to fifty percent glycol solutions, in closed-loop systems. It compensates for pressure changes, ensuring optimal performance. The integrated pressure control cartridge allows flow balancing while the differential pressure regulator makes sure that fluid flow remains unaffected by supply pressure changes.
Maintains constant flow regardless of pressure fluctuations.
Features an integrated pressure control cartridge.
Compatible with Honeywell direct coupled actuators.
Product Highlights
This valve assembly is built to enhance flow consistency and control in HVAC systems, facilitating effective temperature management.
Product Information
Standard Information
Manufacturer Part Number: VRN2HSPX6100
Valve Type: Dynamic Pressure Regulated Control Valve
Technical Specifications
Connection
NPT
Pattern
2-way
Size
3 inches
GPM
35 GPM
Control Signal
Analog, Floating
Body Style
Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size
1/2 inch to 3 inch with female NPT pipe fittings
Body Pressure Rating
360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium
Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
Medium Temperature Range
-22°F to 250°F (-30°C to 121°C)
Maximum Differential Pressure
1 gpm (1/2 inch valve) to 95 gpm (3 inch valve)
Close-off Pressure
100 psid
Flow Characteristics
Equal percentage with flow control insert
Body
Forged brass (ASTM B283)
Trim Material
Stainless Steel
Flow Optimizer
Laser-milled, glass-reinforced Noryl
Trim (ball and stem)
Nickel-chrome plated brass, or stainless steel
Stem Seals
EPDM O-ring and Teflon bearings
Ball Seals
Reinforced Teflon seals, with EPDM O-rings
Regulator
Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators
Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch
Minimum Torque Required
35 lb-in (4 Nm) up to 3 inches, 18 lb-in (2 Nm) up to 3/4 inch