Honeywell VRN2H6SX6200 Pressure Independent Control Valve Assembly

Product Description

The Honeywell VRN2H6SX6200 is a pressure independent control valve assembly designed for HVAC systems. This valve maintains a constant flow of hot or chilled water, compatible with up to fifty percent glycol solutions. It operates effectively in closed-loop systems, regardless of pressure variations. The valve integrates both flow and temperature control, adjusting automatically to maintain desired temperatures when piping pressures change.

• Maintains constant flow of hot or chilled water with up to 50% glycol solutions.
• Features an integrated pressure control cartridge for flow balancing.
• Suitable for HVAC systems.

Product Highlights

The Honeywell VRN2H6SX6200 ensures efficient management of fluid flow, equipped with a differential pressure regulator which allows for independence from supply pressure changes.

Product Information

Standard Information

• Manufacturer Part Number: VRN2H6SX6200
• Valve Type: Dynamic Pressure Regulated Control Valve

Technical Specifications

• Type: Assembly
• Connection: NPT
• Pattern: 2-way
• Size: 3 inches
• GPM: 75 GPM
• Control Signal: Analog, Floating
• Body Style: 2-Way ball valve, straight-through flow, full port with patented flow control insert
• Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
• Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 gpm (1/2inch valve) to 95 gpm (3inch valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim Material: Stainless Steel
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3inch (DN80), 18 lb-in (2 Nm) up to 3/4inch (and 1inch up to 9 gpm)