HONEYWELL VRN2H6PX8200 Pressure Independent Control Valve

Product Description

The Honeywell VRN2H6PX8200 Pressure Independent Control Valve integrates flow and temperature control into one unit. This valve is designed to control the flow in hydronic systems, ensuring temperature stability despite changes in pressure. It includes a built-in pressure control cartridge that helps in flow balancing and control. The valve features threaded connections, available in sizes from half an inch to three inches FNPT, and is compatible with Honeywell's direct-coupled actuators.

• Sizes range from half an inch to three inches with female NPT connections.
• Suitable for controlling hot or chilled water with glycol solutions up to fifty percent.
• Equipped with a differential pressure regulator to maintain a constant pressure drop.

Product Highlights

This valve is ideal for hydronic heating and cooling applications, providing reliable control of water and glycol solutions.

Product Information

Standard Information

• Brand: Honeywell
• MPN: VRN2H6PX8200

Technical Specifications

• Type: Assembly
• Connection: NPT
• Supply Voltage (Nominal): 120 VAC, 240 VAC
• Pattern: 2-way
• Size: Three inches
• GPM: 75 GPM
• Control Signal: Two Position
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: Half an inch to three inches with female NPT fittings
• Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for gases, oil, or steam
• Medium Temperature Range: Minus twenty-two degrees Celsius to 250°F (minus thirty degrees Celsius to 121°C)
• Maximum Differential Pressure: One GPM (half-inch valve) to ninety-five GPM (three-inch valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Minimum Torque Required: Thirty-five lb-in (four Nm) up to three inches (DN80), eighteen lb-in (two Nm) up to three-quarters inches (and one inch up to nine GPM)
• Trim Material: Stainless steel