Honeywell VRN2H6PX6100 Pressure Independent Control Valve

Product Description

The Honeywell VRN2H6PX6100 is a pressure independent control valve with an electric actuator. This valve is designed for effective control of hot or chilled water systems. It accommodates a 3-inch NPT connection and supports a maximum flow rate of seventy-five gallons per minute. With its modulating floating control and fail-open feature, it ensures reliable operation even in critical scenarios. The unit is suitable for use with water or glycol solutions up to fifty percent.

• Features a three-inch NPT connection.
• Provides a maximum flow rate of seventy-five gallons per minute.
• Designed for modulating floating control with fail-open functionality.

Product Highlights

This valve operates on twenty-four volts alternating current and is ideal for HVAC systems requiring precise fluid control.

Product Information

Standard Information

• Brand: Honeywell
• Manufacturer Part Number: VRN2H6PX6100

Technical Specifications

• Type: Assembly
• Connection: NPT
• Pattern: 2-way
• Size: 3 inches
• Flow Rate: 75 GPM
• Control Signal: Analog, Floating
• Valve Type: Dynamic pressure regulated control valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: 1/2 inches to 3 inches with female NPT pipe fittings
• Body Pressure Rating (maximum): 360 psi at 250°F (121°C)
• Controlled Medium: Water or glycol solutions up to 50%; not suitable for combustible gases, oil or steam
• Medium Temperature Range: -22°F to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 GPM (1/2 inches valve) to 95 GPM (3 inches valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body Material: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim Material: Stainless Steel
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at 1/2 inches or 3/4 inches
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80); 18 lb-in (2 Nm) up to 3/4 inches
• Warranty: 1 year on valves, 5 years on actuators
• Product Status: Active