Honeywell VRN2H5SX4002 3-Inch 2-Way 70 GPM Pressure Regulated Control Valve

Product Description

The Honeywell VRN2H5SX4002 is a pressure-regulated control valve designed for hydronic systems. It effectively manages flow and temperature, ensuring consistent performance even with pressure changes. This valve features a built-in pressure control cartridge, allowing for precise flow balancing.

• 2-way valve with female NPT connections.
• Flow rate of 70 GPM designed for water or glycol up to fifty percent.
• Includes a removable manual operating handle.

Product Highlights

This valve optimizes flow performance by maintaining steady pressure. It includes advanced diaphragm technology for accurate flow control.

Product Information

Standard Information

• MPN: VRN2H5SX4002
• Brand: Honeywell

Technical Specifications

• Type: Assembly
• Connection: NPT
• Input Voltage: 24 VAC
• Trim Material: Stainless Steel
• Pattern: 2-way
• Size: 3 in
• Flow Rate: 70 GPM
• Control Signal: Floating, Two Position
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: 1/2 to 3 inches with female NPT pipe fittings
• Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or glycol solutions up to 50%; not suitable for combustible gases, oil, or steam
• Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body Material: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim: Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: ML6161, ML7161, MN6105, MN7505, MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)
• Warranty: 1 year on valves, 5 years on actuators (these actuators available factory-installed)