Honeywell VRN2H3SX6200 Pressure Independent Control Valve Assembly

Product Description

The Honeywell VRN2H3SX6200 is a pressure independent control valve assembly. This valve integrates flow and temperature control for hydronic systems. It helps maintain consistent temperature even during pressure fluctuations.

• Includes NPT connections.
• Constructed with stainless steel trim.
• Designed for two-way applications.

Product Highlights

This valve is suitable for use with Honeywell direct-coupled actuators. It efficiently manages water and glycol solutions, ensuring reliable performance in hydronic systems.

Product Information

Standard Information

• Brand: Honeywell
• MPN: VRN2H3SX6200

Technical Specifications

• Manufacturer: Honeywell
• Type: Assembly
• Connection: NPT
• Trim Material: Stainless Steel
• Pattern: 2-way
• Size: 3 inches
• GPM: 60 GPM
• Control Signal: Analog, Floating
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: half inch to three inches with female NPT pipe fittings
• Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
• Medium Temperature Range: minus twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (minus thirty degrees Celsius to one hundred twenty-one degrees Celsius)
• Maximum Differential Pressure: one GPM (half inch valve) to ninety-five GPM (three inch valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at half inch or three-quarter inch (DN15 ~ DN20)
• Minimum Torque Required: thirty-five lb-in (four Nm) up to three inches (DN80), eighteen lb-in (two Nm) up to three-quarter inch (and one inch up to nine GPM)