Honeywell VRN2H2PXC000 Pressure Independent Control Valve and Actuator Assembly

Product Description

The Honeywell VRN2H2PXC000 is a pressure independent control valve assembly for HVAC systems. This assembly is designed to maintain consistent flow of hot or chilled water in closed-loop systems, even when there are pressure changes. It supports up to fifty percent glycol solutions. The integrated pressure control cartridge is essential for flow balancing and temperature management. The valve is compatible with Honeywell's direct coupled actuators.

• Maintains constant flow in HVAC systems despite pressure variations.
• Features a differential pressure regulator.
• Compatible with Honeywell direct coupled actuators.

Product Highlights

The valve optimizes flow control in heating and cooling applications. Suitable for installation in various HVAC setups, it helps prevent issues related to fluctuating pressures.

Product Information

Standard Information

• Manufacturer Part Number: VRN2H2PXC000
• Valve Type: Dynamic Pressure Regulated Control Valve

Technical Specifications

• Body Style: 2-Way ball valve, straight-through flow, full port with patented flow control insert
• Connection: NPT
• Size: 3 inches
• GPM: 55 GPM
• Control Signal: Floating, Two Position
• Input Voltage: 24 VAC
• Trim Material: Stainless Steel
• Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings
• Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or Glycol solutions up to fifty percent; not suitable for combustible gases, oil or steam
• Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)
• Warranty: 1 year on valves, 5 years on actuators * These actuators available factory-installed