HONEYWELL VRN2GTSX8200 Pressure Independent Control Valve

Product Description

The Honeywell VRN2GTSX8200 is a pressure independent control valve designed for hydronic systems. This valve features an electric actuator that efficiently integrates flow and temperature control. It automatically adjusts flow based on piping pressure variations to maintain the desired temperature.

• Integrated pressure control cartridge for balancing and control.
• Full port, two-way ball design for optimal flow capabilities.
• Compatible with water or glycol solutions up to 50% concentration.

Product Highlights

This valve is suitable for dynamic pressure regulation in heating and cooling applications.

Product Information

Standard Information

• Connection: 2-1/2 inches NPT
• Flow Rate: 40 GPM

Technical Specifications

• Type: Assembly
• Input Voltage: 120 VAC, 240 VAC
• Trim Material: Stainless Steel
• Pattern: 2-way
• Size: 2-1/2 inches
• Control Signal: Two Position
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: 1/2 inches to 3 inches with female NPT pipe fittings
• Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
• Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 GPM (1/2 inches valve) to 95 GPM (3 inches valve)
• Close-off pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inches or 3/4 inches (DN15 ~ DN20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80), 18 lb-in (2 Nm) up to 3/4 inches (and 1 inch up to 9 GPM)
• Warranty: 1 year on valves, 5 years on actuators