HONEYWELL VRN2GSPXB100 Dynamic Pressure Regulated Control Valve Assembly

Product Description

The HONEYWELL VRN2GSPXB100 is a pressure-regulated control valve assembly designed for efficient flow and temperature management in hydronic systems. It is built to automatically maintain desired temperatures during fluctuations in pressure, ensuring optimal performance. This valve is equipped with an integrated pressure control cartridge for effective flow balancing and control.

• Features sizes from one half inch to three inches with female NPT connections.
• Compatible with hot or chilled water and can handle up to fifty percent glycol solutions.
• Employs a differential pressure regulator to maintain a constant pressure drop.

Product Highlights

The HONEYWELL VRN2GSPXB100 is suitable for a variety of applications, enhancing heating and cooling systems by maintaining accurate control over water and glycol flows.

Product Information

Standard Information

• Type: Assembly
• Connection: NPT

Technical Specifications

• Input Voltage: 24 VAC
• Trim Material: Stainless Steel
• Pattern: 2-way
• Size: 2-1/2 inches
• GPM: 35 GPM
• Control Signal: Analog, Floating
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: one half inch to three inches with female NPT pipe fittings
• Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam
• Medium Temperature Range: -22°F to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 GPM (one half inch valve) to 95 GPM (three inch valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at one half inch or three quarter inch (DN15 ~ DN20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to three inches (DN80), 18 lb-in (2 Nm) up to three quarter inch (and one inch up to 9 GPM)
• Warranty: 1 year on valves, 5 years on actuators