Honeywell VRN2GRSX4002 Pressure Independent Control Valve

Product Description

The Honeywell VRN2GRSX4002 is a pressure independent control valve designed for effective management of hydronic systems. This valve features a two-and-a-half inch NPT connection and operates efficiently with a flow rate of thirty gallons per minute. It is equipped with a stainless steel trim and is actuated electrically. This valve utilizes a floating on/off control signal and has fail-in-place capabilities, ensuring reliable operation.

• Features a two-and-a-half inch NPT connection.
• Designed for a thirty gallons per minute flow rate.
• Operates on a twenty-four volt AC supply.

Product Highlights

This valve integrates flow and temperature control to automatically maintain desired conditions in hydronic heating and cooling systems.

Product Information

Standard Information

• Manufacturer Part Number: VRN2GRSX4002
• Valve Type: Dynamic Pressure Regulated Control Valve

Technical Specifications

• Connection: NPT
• Size: 2-1/2 inches
• Pattern: 2-way
• GPM: 30 GPM
• Trim Material: Stainless Steel
• Control Signal: Floating, Two Position
• Supply Voltage: 24 VAC
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings
• Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
• Medium Temperature Range: -22°F to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 gpm (1/2 inch valve) to 95 gpm (3 inch valve)
• Close-off pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 gpm)