Honeywell VRN2GQPX7100 Pressure Independent Control Valve and Actuator Assembly

Product Description

The Honeywell VRN2GQPX7100 is a pressure independent control valve and electric actuator assembly. This two-way valve is designed to maintain a constant flow of hot or chilled water with up to 50% glycol, ensuring optimal performance in closed-loop HVAC systems, even with pressure variations.

• Integrated pressure control cartridge for effective flow balancing.
• Compatible with Honeywell direct coupled actuators.
• Available sizes range from half an inch to three inches.

Product Highlights

This assembly is ideal for HVAC professionals who need reliable flow control solutions in residential or commercial systems.

Product Information

Standard Information

• Brand: Honeywell
• MPN: VRN2GQPX7100

Technical Specifications

• Type: Assembly
• Connection: NPT
• Trim Material: Stainless Steel
• Pattern: 2-way
• Size: 2-1/2 inches
• GPM: 25 GPM
• Control Signal: Two Position
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: 2-Way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: 1/2 inches to 3 inches with female NPT pipe fittings
• Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
• Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 gpm (1/2 inches valve) to 95 gpm (3 inches valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inches or 3/4 inches (DN15 ~ DN 20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80), 18 lb-in (2 Nm) up to 3/4 inches (and 1 inch up to 9 gpm)
• Warranty: 1 year on valves, 5 years on actuators