Honeywell VRN2G9SXC002 Pressure Independent Control Valve and Actuator Assembly

Product Description

The Honeywell VRN2G9SXC002 is a pressure independent control valve and actuator assembly designed for closed-loop HVAC systems. This assembly maintains a consistent flow of water or glycol solutions, ensuring effective operation even when pressure changes occur. It features a combination of flow and temperature control through an integrated pressure control cartridge. The valve's differential pressure regulator adapts fluid flow independent of supply pressure variations. Equipped with a 2-way ball valve and NPT connections, it is compatible with Honeywell direct coupled actuators.

• Maintains constant flow in HVAC systems.
• Features a 2-way valve with NPT connections.
• Compatible with Honeywell direct coupled actuators.

Product Highlights

Product Information

Standard Information

• Manufacturer: Honeywell
• MPN: VRN2G9SXC002

Technical Specifications

• Type: Control Valve Assembly
• Connection: NPT
• Valve Type: Dynamic Pressure Regulated Control Valve
• Pattern: 2-way
• Size: 2-1/2 inches
• GPM: 95 GPM
• Control Signal: Floating, Two Position
• Supply Voltage (Nominal): 24 VAC
• Body Style: 2-Way ball valve, straight-through flow, full port with patented flow control insert
• Body: Forged brass (ASTM B283)
• Trim Material: Stainless Steel
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil, or steam
• Medium Temperature Range: -22 degrees Celsius to 250 degrees Fahrenheit (-30 degrees Celsius to 121 degrees Celsius)
• Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250 degrees Fahrenheit (121 degrees Celsius)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)