HONEYWELL VRN2G9SX6202 Pressure Independent Control Valve

Product Description

The Honeywell VRN2G9SX6202 is a pressure independent control valve designed for precise flow and temperature control. This valve has a two and a half inch NPT connection and is built with stainless steel trim. The modulating floating electric actuator effectively manages temperature by regulating flow in hydronic systems, allowing it to adapt to pressure changes seamlessly. It is ideal for water and glycol solutions with a maximum allowable composition of fifty percent.

• Features a two and a half inch NPT connection.
• Equipped with a modulating floating electric actuator.
• Designed for use with water and glycol solutions.

Product Highlights

This valve is essential for maintaining system efficiency in heating and cooling applications, ensuring reliable temperature management.

Product Information

Standard Information

• Manufacturer Part Number: VRN2G9SX6202
• Type: Control Valve

Technical Specifications

• Connection: NPT
• Supply Voltage (Nominal): 24 VAC
• Trim Material: Stainless Steel
• Pattern: 2-way
• Size: 2-1/2 in
• GPM: 95
• Control Signal: Analog, Floating
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: 1/2 to 3 inches with female NPT fittings
• Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil, or steam
• Medium Temperature Range: -22°F to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 GPM (1/2 in valve) to 95 GPM (3 in valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 or 3/4 (DN15 ~ DN20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 in (DN80), 18 lb-in (2 Nm) up to 3/4 in (and 1 in up to 9 GPM)
• Warranty: 1 year on valves, 5 years on actuators