Honeywell VRN2G8SX9200 Dynamic Pressure Regulated Control Valve

Product Description

The Honeywell VRN2G8SX9200 is a dynamic pressure-regulated control valve. This product manages flow in hydronic systems, ensuring temperature stability during pressure variations. Built for compatibility with Honeywell direct-coupled actuators, the valve showcases a two-way ball valve design and features a straight-through flow with a full port design and a flow control insert.

• Two-way ball valve with integrated pressure control.
• Compatible with hot or chilled water and up to fifty percent glycol solutions.
• Includes a differential pressure regulator for consistent pressure management.

Product Highlights

This control valve is designed for effective flow balancing and control in hydronic heating and cooling systems.

Product Information

Standard Information

• Manufacturer Part Number: VRN2G8SX9200
• Type: Assembly

Technical Specifications

• Connection: NPT
• Input Voltage: 120 VAC, 240 VAC
• Trim Material: Stainless Steel
• Pattern: Two-way
• Size: Two and a half inches
• GPM: 85 GPM
• Control Signal: Two Position
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: Half inch to three inches with female NPT pipe fittings
• Body Pressure Rating (maximum): 360 psi (2500 kPa) at two hundred fifty degrees Fahrenheit (121 degrees Celsius)
• Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil or steam
• Medium Temperature Range: Minus twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (minus thirty degrees Celsius to one hundred twenty-one degrees Celsius)
• Maximum Differential Pressure: One GPM (half inch valve) to ninety-five GPM (three inch valve)
• Close-off pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at half inch or three quarter inch (DN15 ~ DN 20)
• Minimum Torque Required: thirty-five lb-in (4 Nm) up to three inch (DN80), eighteen lb-in (2 Nm) up to three-quarter inch (and one inch up to nine GPM)
• Warranty: One year on valves, five years on actuators * These actuators available factory-installed