Honeywell VRN2G8PX9100 Pressure Independent Control Valve

Product Description

The Honeywell VRN2G8PX9100 Pressure Independent Control Valve regulates flow in hydronic systems to ensure stable temperatures during pressure changes. It combines flow and temperature control in one unit.

• Designed for threaded connections from half inch to three inches FNPT.
• Utilizes a pressure control cartridge for flow balance.
• Operates with up to fifty percent glycol solutions.

Product Highlights

This valve is suitable for maintaining temperate environments in both heating and cooling systems.

Product Information

Standard Information

• Brand: Honeywell
• MPN: VRN2G8PX9100

Technical Specifications

• Type: Assembly
• Connection: NPT
• Input Voltage: 120 VAC, 240 VAC
• Trim Material: Stainless Steel
• Pattern: 2-way
• Size: 2-1/2 inches
• GPM: 85 GPM
• Control Signal: Two Position
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: Half inch to three inches with female NPT pipe fittings
• Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250 degrees Fahrenheit (121 degrees Celsius)
• Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
• Medium Temperature Range: -22 degrees Celsius to 250 degrees Fahrenheit (-30 degrees Celsius to 121 degrees Celsius)
• Maximum Differential Pressure: 1 GPM (half inch valve) to 95 GPM (three inch valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at half inch or three quarter inch
• Minimum Torque Required: 35 lb-in (4 Nm) up to three inches (DN80), 18 lb-in (2 Nm) up to three quarter inch
• Warranty: 1 year on valves, 5 years on actuators