Honeywell VRN2G6SXA100 Pressure Independent Control Valve

Product Description

The Honeywell VRN2G6SXA100 is a pressure independent control valve for hydronic systems. It regulates flow and temperature efficiently by controlling flow automatically in response to piping pressure changes. This valve includes a pressure control cartridge for effective flow balancing and is compatible with hot and chilled water, accommodating up to fifty percent glycol solutions.

• Valve size: two and a half inches with NPT connection
• Maximum flow rate: seventy five gallons per minute
• Operates on twenty-four VAC supply voltage

Product Highlights

This control valve is designed to ensure stable temperature control in a variety of hydronic applications.

Product Information

Standard Information

• Manufacturer: Honeywell
• Product Status: Active

Technical Specifications

• Manufacturer Part Number: VRN2G6SXA100
• Type: Control Valve
• Connection: NPT
• Supply Voltage: 24 VAC
• Trim Material: Stainless Steel
• Pattern: Two-way
• Size: Two and a half inches
• Maximum Flow Rate: Seventy five gallons per minute
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: One half inch to three inches with female NPT pipe fittings
• Body Pressure Rating: Three hundred sixty psi (two thousand five hundred kPa) at two hundred fifty degrees Fahrenheit (one hundred twenty one degrees Celsius)
• Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam
• Medium Temperature Range: Minus twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (minus thirty degrees Celsius to one hundred twenty one degrees Celsius)
• Maximum Differential Pressure: One gallon per minute (one half inch valve) to ninety five gallons per minute (three inch valve)
• Close-off Pressure: One hundred psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim: Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at one half inch or three fourths inch (DN15 ~ DN20)
• Minimum Torque Required: Thirty-five lb-in (four Nm) up to three inches (DN80), eighteen lb-in (two Nm) up to three fourths inch and one inch up to nine gallons per minute
• Warranty: One year on valves, five years on actuators