Honeywell VRN2G6SX6202 Pressure Independent Control Valve and Actuator Assembly

Product Description

The Honeywell VRN2G6SX6202 is a pressure independent control valve and actuator assembly designed for HVAC systems. This two-way valve controls the flow of hot or chilled water mixed with up to fifty percent glycol. It includes a built-in pressure control cartridge to ensure accurate flow balancing and temperature management in hydronic systems.

• Maintains a steady temperature by adjusting water flow automatically.
• Compatible with Honeywell direct-coupled actuators for ease of installation.
• Suitable for piping with pressures that fluctuate.

Product Highlights

This assembly is ideal for closed-loop systems, ensuring optimal performance and reliability.

Product Information

Standard Information

• Brand: Honeywell
• MPN: VRN2G6SX6202

Technical Specifications

• Type: Assembly
• Connection: NPT
• Size: Two and one half inches
• GPM: 75 GPM
• Pattern: Two-way
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: 2-Way ball valve, straight-through flow, full port with patented flow control insert
• Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil or steam
• Medium Temperature Range: -22°F to 250°F (-30°C to 121°C)
• Close-off Pressure: 100 psid
• Trim Material: Stainless Steel
• Control Signal: Analog, Floating
• Input Voltage: 24 VAC
• Pipe Size: One half inch to three inches with female NPT pipe fittings
• Maximum Differential Pressure: 1 gpm (one half inch valve) to 95 gpm (three inch valve)
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*
• Compatible Actuators Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at one half inch or three quarter inch (DN15 ~ DN20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to three inches (DN80) 18 lb-in (2 Nm) up to three quarter inch (and one inch up to 9 gpm)
• Warranty: 1 year on valves, 5 years on actuators