Honeywell VRN2G5PX9100 Pressure Independent Control Valve

Product Description

The Honeywell VRN2G5PX9100 is a pressure independent control valve designed for efficient flow and temperature management in hydronic systems. This valve maintains consistent temperatures even when pressure changes occur. Its integrated pressure control cartridge enables precise flow balancing.

• Valve size: two and one-half inches NPT connection.
• Designed for use with Honeywell direct-coupled actuators.
• Flow rate of seventy gallons per minute.

Product Highlights

This valve is ideal for applications requiring reliable flow control of water or glycol solutions up to fifty percent.

Product Information

Standard Information

• Brand: Honeywell
• MPN: VRN2G5PX9100

Technical Specifications

• Type: Assembly
• Connection: NPT
• Input Voltage: 120 VAC, 240 VAC
• Trim Material: Stainless Steel
• Pattern: Two-way
• Flow Rate: 70 GPM
• Control Signal: Two Position
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: 1/2 inches to 3 inches with female NPT pipe fittings
• Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or glycol solutions up to 50%; not suitable for combustible gases, oil, or steam
• Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 GPM (1/2 inches valve) to 95 GPM (3 inches valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim: Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at 1/2 inches or 3/4 inches (DN15 to DN20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80), 18 lb-in (2 Nm) up to 3/4 inches and 1 inch up to 9 GPM