Honeywell VRN2G5PX7200 Pressure Independent Control Valve Assembly

Product Description

The Honeywell VRN2G5PX7200 is a pressure independent control valve assembly with an electric actuator. This valve is suitable for closed-loop HVAC systems, ensuring a steady flow of hot or chilled water, while tolerating solutions with up to 50% glycol. Key features include a two and a half inch NPT connection and a two-way configuration which support a flow rate of seventy gallons per minute.

• Features a two and a half inch NPT connection and a two-way valve pattern.
• Suitable for water or glycol solutions up to 50%.
• Includes a pressure regulator for consistent pressure drop across the valve seat.

Product Highlights

This valve provides an effective solution for flow balancing and control, operating at twenty-four volts alternating current with a fail-closed mechanism.

Product Information

Standard Information

• Manufacturer: Honeywell
• Brand: Honeywell

Technical Specifications

• MPN: VRN2G5PX7200
• Type: Assembly
• Connection: NPT
• Trim Material: Stainless Steel
• Pattern: 2-way
• Size: Two and a half inches
• GPM: Seventy gallons per minute
• Control Signal: Two Position
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: One half inch to three inches with female NPT pipe fittings
• Body Pressure Rating: Three hundred sixty psi (two thousand five hundred kPa) at two hundred fifty degrees Fahrenheit (one hundred twenty-one degrees Celsius)
• Controlled Medium: Water or glycol solutions up to 50%; not suitable for combustible gases, oil, or steam
• Medium Temperature Range: Minus twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (minus thirty degrees Celsius to one hundred twenty-one degrees Celsius)
• Maximum Differential Pressure: One gallon per minute (one half inch valve) to ninety-five gallons per minute (three inch valve)
• Close-off Pressure: One hundred psi
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105, MS6103, MS7503, MS8103 only at one half inch or three quarter inch
• Minimum Torque Required: Thirty-five lb-in (four Nm) up to three inches, eighteen lb-in (two Nm) up to three quarters of an inch