HONEYWELL VRN2G5PX6202 Pressure Independent Control Valve and Actuator Assembly

Product Description

The Honeywell VRN2G5PX6202 is a pressure independent control valve and actuator assembly. This two-way valve maintains a constant flow of hot or chilled water, mixed with up to 50 percent glycol, in closed-loop HVAC systems.

• Maintains constant flow regardless of pressure fluctuations.
• Features a differential pressure regulator.
• Suitable for water or glycol solutions up to 50 percent.

Product Highlights

This valve is designed to optimize flow conditions in HVAC settings. Its integrated pressure control cartridge ensures effective flow balancing and temperature regulation.

Product Information

Standard Information

• Manufacturer Part Number: VRN2G5PX6202
• Valve Type: Dynamic Pressure Regulated Control Valve

Technical Specifications

• Type: Assembly
• Connection: NPT
• Trim Material: Stainless Steel
• Pattern: 2-way
• Size: 2-1/2 inches
• GPM: 70 GPM
• Control Signal: Analog, Floating
• Body Style: 2-Way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: 1/2 inches to 3 inches with female NPT pipe fittings
• Body Pressure Rating: 360 psi (2500 kPa) at 250 degrees Fahrenheit (121 degrees Celsius)
• Controlled Medium: Water or Glycol solutions up to 50 percent; not suitable for combustible gases, oil, or steam
• Medium Temperature Range: -22 degrees Fahrenheit to 250 degrees Fahrenheit (-30 degrees Celsius to 121 degrees Celsius)
• Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)