Honeywell VRN2G5PX4002 Pressure Independent Control Valve

Product Description

The Honeywell VRN2G5PX4002 is a pressure independent control valve designed for efficient flow and temperature management. This valve integrates a dual function in one assembly, suitable for a variety of heating and cooling systems. It is compatible with both hot and chilled water, and can handle glycol solutions up to fifty percent.

• Features a differential pressure regulator for a stable pressure drop.
• Utilizes a patented flow control ball insert for equal percentage flow characteristics.
• Incorporates a removable manual operating handle for control during installation or outages.

Product Highlights

The Honeywell VRN2G5PX4002 excels at balancing flow, ensuring optimal system performance.

Product Information

Standard Information

• Valve Type: Dynamic Pressure Regulated Control Valve
• Brand: HONEYWELL

Technical Specifications

• MPN: VRN2G5PX4002
• Type: Assembly
• Connection: NPT
• Input Voltage: 24 VAC
• Trim Material: Stainless Steel
• Pattern: 2-way
• Size: 2-1/2 inches
• GPM: 70 GPM
• Control Signal: Floating, Two Position
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: 1/2 inches to 3 inches with female NPT pipe fittings
• Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or glycol solutions up to 50%; not suitable for combustible gases, oil or steam
• Medium Temperature Range: -22°F to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)
• Warranty: 1 year on valves, 5 years on actuators