The Honeywell VRN2G3SX9202 is a pressure independent control valve designed to regulate fluid flow efficiently. This valve features a two and one half inch NPT connection and is constructed with durable stainless steel trim. It operates with a flow rate of sixty gallons per minute and includes an electric actuator for precise on/off control.
Equipped with a two and one half inch NPT connection.
Provides a maximum flow rate of sixty gallons per minute.
Includes an electric actuator for effective on/off control.
Product Highlights
This valve is suitable for dynamic pressure regulation and is housed in a NEMA 3R enclosure for added protection.
Product Information
Standard Information
Manufacturer Part Number: VRN2G3SX9202
Type: Valve Only
Technical Specifications
Connection
NPT
Trim Material
Stainless Steel
Pattern
Two-way
Size
Two and one half inches
GPM
Sixty gallons per minute
Valve Type
Dynamic Pressure Regulated Control Valve
Body Style
Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size
One half inch to three inches with female NPT pipe fittings
Body Pressure Rating (maximum)
Three hundred sixty psi (two thousand five hundred kPa) at two hundred fifty degrees Fahrenheit (one hundred twenty one degrees Celsius)
Controlled Medium
Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam
Medium Temperature Range
Minus twenty two degrees Celsius to two hundred fifty degrees Fahrenheit (minus thirty degrees Celsius to one hundred twenty one degrees Celsius)
Maximum Differential Pressure
One gallon per minute (one half inch valve) to ninety five gallons per minute (three inch valve)
Close-off Pressure
One hundred psid
Flow Characteristics
Equal percentage with flow control insert
Body
Forged brass (ASTM B283)
Flow Optimizer
Laser-milled, glass-reinforced Noryl
Trim (ball and stem)
Nickel-chrome plated brass, or stainless steel
Stem Seals
EPDM O-ring and Teflon bearings
Ball Seals
Reinforced Teflon seals with EPDM O-rings
Regulator
Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators
Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at one half inch or three quarter inch (DN15 ~ DN20)
Minimum Torque Required
Thirty five lb-in (four Nm) up to three inches (DN80), eighteen lb-in (two Nm) up to three quarter inch (and one inch up to nine gallons per minute)