HONEYWELL VRN2G2PXB102 Pressure Independent Control Valve & Actuator Assembly

Product Description

The Honeywell VRN2G2PXB102 is a two-way pressure independent control valve and actuator assembly. It ensures a steady flow of hot or chilled water, even with up to 50% glycol solutions, in closed-loop HVAC systems. This valve is designed for consistent performance despite variations in pressure. The assembly features a built-in pressure control cartridge that assists with flow balancing, making it ideal for various HVAC applications. The valve is compatible with Honeywell direct coupled actuators and has a durable forged brass body with female NPT connections.

• Maintains constant flow regardless of pressure fluctuations.
• Features an integrated pressure control cartridge.
• Suitable for hot or chilled water with up to 50% glycol solutions.

Product Highlights

This valve and actuator assembly is essential for HVAC systems requiring stable flow control and compatibility with different heating and cooling mediums.

Product Information

Standard Information

• Type: Assembly
• Connection: NPT

Technical Specifications

• Supply Voltage: 24 VAC
• Trim Material: Stainless Steel
• Pattern: 2-way
• Size: 2-1/2 in
• GPM: 50 GPM
• Control Signal: Analog, Floating
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: 2-Way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: 1/2 to 3 inches with female NPT pipe fittings
• Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil, or steam
• Medium Temperature Range: -22°F to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 GPM (1/2 in valve) to 95 GPM (3 in valve)
• Close-off Pressure: 100 PSID
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*, Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 in or 3/4 in (DN15 ~ DN20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 in (DN80), 18 lb-in (2 Nm) up to 3/4 in (and 1 in up to 9 GPM)
• Warranty: 1 year on valves, 5 years on actuators * These actuators available factory-installed