Honeywell VRN2G1SXD000 Pressure Independent Control Valve

Product Description

The Honeywell VRN2G1SXD000 is a pressure-independent control valve designed for hydronic systems. It regulates flow and temperature ensuring efficient system performance. This valve integrates well with Honeywell actuators and is suitable for both hot and chilled water applications, including glycol solutions up to fifty percent.

• NPT connection type.
• Stainless steel trim for enhanced durability.
• Operates on a nominal twenty-four VAC supply voltage.

Product Highlights

This valve provides essential control in hydronic systems by maintaining consistent flow and temperature, even with pressure changes.

Product Information

Standard Information

• Brand: Honeywell
• Manufacturer: Honeywell

Technical Specifications

• MPN: VRN2G1SXD000
• Type: Control Valve
• Connection: NPT
• Supply Voltage (Nominal): 24 VAC
• Trim Material: Stainless Steel
• Pattern: 2-way
• Size: 2-1/2 inches
• GPM: 50 GPM
• Control Signal: Analog, Floating
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: 1/2 inches to 3 inches with female NPT pipe fittings
• Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
• Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 GPM (1/2 inches valve) to 95 GPM (3 inches valve)
• Close-off pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inches or 3/4 inches (DN15 ~ DN20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80) and 18 lb-in (2 Nm) up to 3/4 inches (and 1 inches up to 9 GPM)
• Warranty: 1 year on valves, 5 years on actuators