Honeywell VRN2FTPX6200 Pressure Independent Control Valve Assembly

Product Description

The Honeywell VRN2FTPX6200 is a pressure independent control valve assembly. This valve is designed to integrate flow and temperature control. It effectively manages flow in hydronic systems, ensuring consistent temperatures even when there are pressure variations. The valve features an integrated pressure control cartridge, allowing for both flow balancing and precise control. It is compatible with Honeywell direct-coupled actuators and works effectively with hot or chilled water, including solutions with up to fifty percent glycol.

• Valve size: two inches NPT connection
• Flow rate: forty gallons per minute
• Suitable for use with twenty-four VAC supply voltage

Product Highlights

The Honeywell VRN2FTPX6200 is crucial for maintaining system efficiency in heating and cooling applications.

Product Information

Standard Information

• Brand: Honeywell
• Manufacturer Part Number: VRN2FTPX6200

Technical Specifications

• Type: Assembly
• Valve Type: Dynamic Pressure Regulated Control Valve
• Connection: NPT
• Size: two inches
• Pattern: two-way
• GPM: forty gallons per minute
• Control Signal: Analog, Floating
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: one-half inch to three inches with female NPT pipe fittings
• Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam
• Medium Temperature Range: minus twenty-two degrees Celsius to 250°F (minus thirty degrees Celsius to 121°C)
• Maximum Differential Pressure: one gallon per minute (one-half inch valve) to ninety-five gallons per minute (three-inch valve)
• Close-off Pressure: one hundred psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Trim Material: Stainless Steel
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim: Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*
• Compatible Actuators Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at one-half inch or three-fourths inch (DN15 ~ DN 20)
• Minimum Torque Required: thirty-five lb-in (four Nm) up to three inches (DN80), eighteen lb-in (two Nm) up to three-fourths inch (and one inch up to nine gallons per minute)
• Warranty: one year on valves, five years on actuators