The Honeywell VRN2FSSX7200 is a pressure independent control valve assembly designed for use in HVAC systems. This assembly features an electric actuator that manages water flow efficiently. It is compatible with a variety of fluids including water and glycol solutions up to 50% concentration. The valve's construction includes a two-way ball valve design with a straight-through flow path, ensuring reliable operation.
Includes a manual operating handle for use during installation or in case of power failure.
Constructed with stainless steel trim for enhanced durability.
Designed for closed-loop systems, maintaining a constant flow rate.
Product Highlights
This valve assembly regulates flow effectively, providing both flow balancing and control functions.
Product Information
Standard Information
Manufacturer: Honeywell
Brand: Honeywell
Technical Specifications
MPN
VRN2FSSX7200
Type
Assembly
Connection
NPT
Trim Material
Stainless Steel
Pattern
2-way
Size
2 inches
GPM
30 GPM
Control Signal
Two Position
Valve Type
Dynamic Pressure Regulated Control Valve
Body Style
2-Way ball valve, straight-through flow, full port with patented flow control insert
Body Pressure Rating
360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium
Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
Medium Temperature Range
-22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure
1 gpm (1/2inch valve) to 95 gpm (3inch valve)
Close-off Pressure
100 psid
Flow Characteristics
Equal percentage with flow control insert
Body
Forged brass (ASTM B283)
Flow Optimizer
Laser-milled, glass-reinforced Noryl
Trim (ball and stem)
Nickel-chrome plated brass, or stainless steel
Stem Seals
EPDM O-ring and Teflon bearings
Ball Seals
Reinforced Teflon seals, with EPDM O-rings
Regulator
Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators
Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2inch or 3/4inch (DN15 ~ DN20)
Minimum Torque Required
35 lb-in (4 Nm) up to 3inch (DN80), 18 lb-in (2 Nm) up to 3/4inch (and 1inch up to 9 gpm)
Warranty
1 year on valves, 5 years on actuators * These actuators available factory-installed.