HONEYWELL VRN2FRSX7200 Pressure Independent Control Valve Assembly

Product Description

The Honeywell VRN2FRSX7200 is a pressure independent control valve assembly suitable for HVAC systems. This product ensures a steady flow of hot or chilled water, even with pressure variations, up to fifty percent glycol solutions in closed-loop systems. The integrated pressure control cartridge optimizes flow balancing and control. It features a two-way valve with a two-inch NPT connection and supports a flow rate of thirty gallons per minute.

• Maintains constant flow in HVAC systems despite pressure variations.
• Features a two-inch NPT connection and thirty GPM flow rate.
• Includes a spring return actuator operating on twenty-four VAC.

Product Highlights

The valve supports a variety of applications in HVAC systems, offering reliability and efficiency in flow management.

Product Information

Standard Information

• Brand: Honeywell
• MPN: VRN2FRSX7200

Technical Specifications

• Type: Assembly
• Connection: NPT
• Trim Material: Stainless Steel
• Pattern: 2-way
• Size: 2 inches
• GPM: 30 GPM
• Control Signal: Two Position
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: 2-Way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: 1/2 inch to 3 inches with female NPT fittings
• Body Pressure Rating: 360 psi at 250°F (121°C)
• Controlled Medium: Water or Glycol solutions up to fifty percent; not for combustible gases, oil, or steam
• Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches; 18 lb-in (2 Nm)
• Warranty: 1 year on valves, 5 years on actuators