HONEYWELL VRN2FRPXA200 Pressure Independent Control Valve and Actuator Assembly

Product Description

The Honeywell VRN2FRPXA200 is a pressure independent control valve and actuator assembly designed for closed-loop HVAC systems. This unit maintains a constant flow of hot or chilled water, including solutions with up to 50% glycol, despite variations in pressure. It features an integrated pressure control cartridge for effective flow balancing and employs a differential pressure regulator, making fluid flow independent of supply pressure changes. The assembly includes a two-way ball valve with NPT connections and a plated brass trim.

• Maintains constant flow in HVAC systems despite pressure variations.
• Features a two-way ball valve with patented flow control insert.
• Compatible with Honeywell direct coupled actuators.

Product Highlights

The Honeywell VRN2FRPXA200 supports efficient temperature control by providing reliable flow rates in various HVAC applications.

Product Information

Standard Information

• Manufacturer Part Number: VRN2FRPXA200
• Type: Assembly

Technical Specifications

• Connection: NPT
• Pattern: Two-way
• Size: Two inches
• GPM: 30 GPM
• Control Signal: Two Position
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: One half inch to three inches with female NPT pipe fittings
• Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or Glycol solutions up to 50%
• Medium Temperature Range: Minus twenty-two degrees Fahrenheit to two hundred fifty degrees Fahrenheit (minus thirty degrees Celsius to one hundred twenty-one degrees Celsius)
• Maximum Differential Pressure: One GPM (one-half inch valve) to ninety-five GPM (three-inch valve)
• Close-off Pressure: 100 PSID
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim Material: Stainless Steel
• Trim (ball and stem): Nickel-chrome plated brass or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at one half inch or three quarter inch (DN15 ~ DN20)
• Minimum Torque Required: Thirty-five lb-in (four Nm) up to three inches (DN80); eighteen lb-in (two Nm) up to three quarter inch (and one inch up to nine GPM)
• Warranty: One year on valves, five years on actuators