HONEYWELL VRN2FRPX8200 Pressure Independent Control Valve

Product Description

The HONEYWELL VRN2FRPX8200 is a pressure independent control valve assembly designed for efficient flow and temperature regulation in hydronic systems. This valve automatically adjusts flow to maintain temperature during pressure changes. It features an integrated pressure control cartridge for flow balancing and works with Honeywell direct-coupled actuators. Ideal for use with hot or chilled water and can accommodate up to fifty percent glycol solutions.

• NPT connection type
• Two-way valve pattern
• Nominal supply voltage of one hundred twenty to two hundred forty VAC

Product Highlights

The valve is suitable for various applications in HVAC systems, ensuring precise temperature control and enhanced system performance.

Product Information

Standard Information

• Brand: HONEYWELL
• MPN: VRN2FRPX8200

Technical Specifications

• Type: Assembly
• Connection: NPT
• Input Voltage: 120 VAC, 240 VAC
• Trim Material: Stainless Steel
• Pattern: 2-way
• Size: 2 in
• GPM: 30 GPM
• Control Signal: Two Position
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: 1/2 in to 3 in with female NPT pipe fittings
• Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250 °F (121 °C)
• Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam
• Medium Temperature Range: -22 °C to 250 °F (-30 °C to 121 °C)
• Maximum Differential Pressure: 1 gpm (1/2 in valve) to 95 gpm (3 in valve)
• Close-off pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 in or 3/4 in (DN15 ~ DN 20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 in (DN80), 18 lb-in (2 Nm) up to 3/4 in (and 1 in up to 9 gpm)
• Warranty: 1 year on valves, 5 years on actuators