Honeywell VRN2F6SXA100 Pressure Independent Control Valve

Product Description

The Honeywell VRN2F6SXA100 Pressure Independent Control Valve is designed for efficient flow and temperature control in hydronic systems. This valve maintains optimal temperatures despite fluctuations in piping pressures, making it suitable for a variety of applications.

• Available in sizes from one half to three inches with female NPT connections.
• Compatible with hot or chilled water and up to fifty percent glycol solutions.
• Features a differential pressure regulator ensuring constant pressure drop.

Product Highlights

The Honeywell VRN2F6SXA100 combines automation and precision in one seamless unit, ensuring effective control over water flow in heating and cooling systems.

Product Information

Standard Information

• Manufacturer Part Number: VRN2F6SXA100
• Type: Control Valve

Technical Specifications

• Connection: NPT
• Supply Voltage (Nominal): 24 VAC
• Trim Material: Stainless Steel
• Pattern: Two-way
• Size: 2 inches
• GPM: 75 GPM
• Control Signal: Two Position
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: one half inch to three inches with female NPT pipe fittings
• Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250 degrees Fahrenheit (121 degrees Celsius)
• Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil or steam
• Medium Temperature Range: negative twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (negative thirty degrees Celsius to one hundred twenty-one degrees Celsius)
• Maximum Differential Pressure: one GPM (one half inch valve) to ninety-five GPM (three inch valve)
• Close-off pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at one half inch or three fourths inch (DN15 - DN20)
• Minimum Torque Required: thirty-five lb-in (four Nm) up to three inches (DN80) and eighteen lb-in (two Nm) up to three fourths inch (and one inch up to nine GPM)