HONEYWELL VRN2F6PXB100 Pressure Independent Control Valve

Product Description

The Honeywell VRN2F6PXB100 is a pressure independent control valve designed for use in hydronic systems. This valve manages water flow and temperature, adjusting automatically as piping pressures change. It features a two-inch NPT connection and supports a flow rate of seventy-five gallons per minute.

• 2-inch NPT connection
• Flow rate of 75 GPM
• Electric actuator with fail-safe functionality

Product Highlights

This valve is suitable for controlling water and glycol solutions with temperatures ranging from -22 degrees Celsius to 121 degrees Celsius. The built-in pressure control cartridge ensures system balance and efficiency.

Product Information

Standard Information

• Brand: HONEYWELL
• MPN: VRN2F6PXB100

Technical Specifications

• Type: Assembly
• Connection: NPT
• Pattern: 2-way
• Size: 2 inches
• GPM: 75
• Control Signal: Analog, Floating
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow
• Pipe Size: 1/2 inch to 3 inches with female NPT pipe fittings
• Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or Glycol solutions up to 50%
• Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim Material: Stainless Steel
• Trim (ball and stem): Nickel-chrome plated brass or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80) and 18 lb-in (2 Nm) up to 3/4 inch
• Warranty: 1 year on valves, 5 years on actuators