The Honeywell VRN Series Pressure Regulated Control Valve Assembly, MPN VRN2F5SX9202, provides effective flow control for hydronic systems. This 2-way valve manages flow to keep temperatures steady, even with changing pipe pressures. It includes a pressure control cartridge to balance flow automatically. The assembly features female NPT connections and supports pipe sizes from one half inch to three inches. It works seamlessly with Honeywell actuators.
Two-way ball valve with straight-through flow.
Suitable for water or glycol mixtures up to fifty percent.
Constructed with stainless steel trim.
Product Highlights
Ideal for temperature management in hydronic systems
Product Information
Standard Information
Brand: Honeywell
MPN: VRN2F5SX9202
Technical Specifications
Type
Assembly
Connection
NPT
Input Voltage
120 VAC, 240 VAC
Trim Material
Stainless Steel
Pattern
2-way
Size
2 inches
GPM
70 GPM
Control Signal
Two Position
Valve Type
Dynamic Pressure Regulated Control Valve
Body Style
Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size
One half inch to three inches with female NPT pipe fittings
Body Pressure Rating (maximum)
360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium
Water or Glycol solutions up to 50%
Medium Temperature Range
-22°F to 250°F (-30°C to 121°C)
Maximum Differential Pressure
1 gpm (one half inch valve) to 95 gpm (three inch valve)
Close-off Pressure
100 psid
Flow Characteristics
Equal percentage with flow control insert
Body
Forged brass (ASTM B283)
Flow Optimizer
Laser-milled, glass-reinforced Noryl
Trim (ball and stem)
Nickel-chrome plated brass, or stainless steel
Stem Seals
EPDM O-ring and Teflon bearings
Ball Seals
Reinforced Teflon seals with EPDM O-rings
Regulator
Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators
Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*. Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at one half inch or three quarter inch (DN15 ~ DN20)
Minimum Torque Required
35 lb-in (4 Nm) up to three inches (DN80), 18 lb-in (2 Nm) up to three quarter inch (and one inch up to 9 gpm)