Honeywell VRN2F5SX7100 Pressure Independent Control Valve

Product Description

The Honeywell VRN2F5SX7100 is a pressure-independent control valve designed for hydronic systems. It features an electric actuator and regulates flow and temperature to maintain efficiency. This valve automatically adjusts flow rates to accommodate pressure fluctuations.

• 2-inch NPT connection
• 70 GPM flow rate
• Stainless steel trim

Product Highlights

This valve is ideal for maintaining consistent temperatures in heating and cooling systems. It is built to handle water or glycol solutions up to fifty percent and operates effectively within a medium temperature range of negative twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit.

Product Information

Standard Information

• Brand: Honeywell
• MPN: VRN2F5SX7100

Technical Specifications

• Type: Valve Only
• Connection: NPT
• Trim Material: Stainless Steel
• Pattern: 2-way
• Size: 2 inches
• Flow Rate: 70 GPM
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: 1/2 inch to 3 inches with female NPT pipe fittings
• Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil, or steam
• Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
• Close-off pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)
• Warranty: 1 year on valves, 5 years on actuators