Honeywell VRN2F5PX7200 Pressure Independent Control Valve 2-way valve

Product Description

The Honeywell VRN Series VRN2F5PX7200 is a pressure independent control valve. This valve utilizes an electric actuator and features a 2-inch NPT connection for effective flow control. With a flow rate of seventy GPM, it is suitable for hydronic systems. The valve is designed with a fail-safe closed configuration, ensuring safe operations under varying pressure conditions.

• 2-inch NPT connection
• 70 GPM flow rate
• Fail-safe closed configuration

Product Highlights

This control valve is essential for maintaining temperature in hydronic systems, adapting to pressure fluctuations.

Product Information

Standard Information

• Manufacturer: Honeywell
• MPN: VRN2F5PX7200

Technical Specifications

• Type: Assembly
• Connection: NPT
• Size: 2 inches
• GPM: 70
• Pattern: 2-way
• Valve Type: Dynamic Pressure Regulated Control Valve
• Control Signal: Two Position
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: 1/2 inches to 3 inches with female NPT fittings
• Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or Glycol solutions up to 50%
• Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 GPM (1/2 inches valve) to 95 GPM (3 inches valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim Material: Stainless Steel
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inches or 3/4 inches (DN15 ~ DN 20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80) 18 lb-in (2 Nm) up to 3/4 inches (and 1 inch up to 9 GPM)
• Weight: 18 lbs