Honeywell VRN2F5PX7102 Pressure Independent Control Valve

Product Description

The Honeywell VRN2F5PX7102 Pressure Independent Control Valve integrates flow and temperature control into a single assembly. This dynamic pressure regulated control valve maintains temperature in hydronic systems, adjusting flow automatically to account for pressure variations.

• Includes a direct-coupled electric actuator.
• Designed for use with water or glycol solutions.
• Forged brass body with stainless steel trim for durability.

Product Highlights

The valve's compact design and efficient performance make it suitable for diverse hydronic heating and cooling systems.

Product Information

Standard Information

• Brand: Honeywell
• MPN: VRN2F5PX7102

Technical Specifications

• Type: Assembly
• Connection: NPT
• Supply Voltage (Nominal): 24 VAC
• Trim Material: Stainless Steel
• Pattern: 2-way
• Size: 2 inches
• Flow Rate: 70 GPM
• Control Signal: Two Position
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: 1/2 to 3 inches with female NPT pipe fittings
• Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
• Medium Temperature Range: -22°F to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
• Close-off pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)
• Warranty: 1 year on valves, 5 years on actuators, these actuators available factory-installed.