Honeywell VRN2F3PX4000 Pressure Independent Control Valve

Product Description

The Honeywell VRN2F3PX4000 is a pressure independent control valve designed for hydronic systems. This valve integrates flow and temperature control in one unit, providing reliable performance during pressure changes. The valve body is made from forged brass, ensuring durability and longevity.

• Connection type: Two-inch NPT
• Flow rate: Sixty Gallons Per Minute (GPM)
• Control signal: Floating, Two Position

Product Highlights

The Honeywell VRN2F3PX4000 valve is crafted for optimal performance, featuring a robust design that facilitates accurate flow regulation.

Product Information

Standard Information

• Manufacturer: Honeywell
• Product Status: Active

Technical Specifications

• MPN: VRN2F3PX4000
• Type: Control Valve
• Connection: 2-inch NPT
• Supply Voltage (Nominal): 24 VAC
• Trim Material: Stainless Steel
• Pattern: 2-way
• Size: 2 inches
• Flow Rate: 60 GPM
• Control Signal: Floating, Two Position
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: 1/2 inches to 3 inches with female NPT fittings
• Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or Glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam
• Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: From 1 GPM (1/2 inches valve) to 95 GPM (3 inches valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at 1/2 inches or 3/4 inches (DN15 ~ DN20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80); 18 lb-in (2 Nm) up to 3/4 inches (and 1 inches up to 9 GPM)
• Warranty: 1 year on valves, 5 years on actuators