Honeywell VRN2F2SX8100 Pressure Independent Control Valve

Product Description

The Honeywell VRN2F2SX8100 is a pressure independent control valve designed for precise flow management in hydronic systems. This valve is equipped with an electric actuator, allowing it to automatically adjust the flow to maintain optimal temperature levels when piping pressures change.

• Features a two-way design with a stainless steel trim.
• Designed for a flow rate of fifty-five gallons per minute.
• Operates efficiently on a voltage range of 100 to 250 VAC.

Product Highlights

This control valve is essential for maintaining system balance and temperature control, making it suitable for various heating and cooling applications.

Product Information

Standard Information

• Manufacturer Part Number: VRN2F2SX8100
• Type: Assembly

Technical Specifications

• Connection: NPT
• Input Voltage: 120 VAC, 240 VAC
• Trim Material: Stainless Steel
• Pattern: Two-way
• Size: 2 in
• GPM: 55 GPM
• Control Signal: Two Position
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: 1/2 to 3 in with female NPT fittings
• Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
• Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 GPM (1/2 in valve) to 95 GPM (3 in valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at 1/2 or 3/4 in
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 in; 18 lb-in (2 Nm) up to 3/4 in (and 1 in up to 9 GPM)
• Warranty: 1 year on valves, 5 years on actuators