Honeywell VRN2ETPX7200 Pressure Independent Control Valve Assembly

Product Description

The Honeywell VRN2ETPX7200 is a pressure independent control valve assembly designed for hydronic systems. It regulates both flow and temperature, ensuring consistent performance despite changes in piping pressure. This valve features a built-in pressure control cartridge for effective flow management. It comes with threaded one and a half inch FNPT connections and is compatible with Honeywell actuators.

• Includes integrated pressure control for flow balancing.
• Designed for water and glycol solutions up to fifty percent.
• Features a differential pressure regulator.

Product Highlights

This valve is suitable for diverse applications, providing reliable temperature control in hydronic systems.

Product Information

Standard Information

• Type: Assembly
• Connection: NPT

Technical Specifications

• Trim Material: Stainless Steel
• Pattern: 2-way
• Size: 1-1/2 inches
• Flow Rate: 40 GPM
• Control Signal: Two Position
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: 1/2 inches to 3 inches with female NPT fittings
• Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or Glycol solutions up to fifty percent; not for combustible gases, oil, or steam
• Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body Material: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim: Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105, MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)
• Warranty: 1 year on valves, 5 years on actuators * These actuators available factory-installed.