Honeywell VRN2ESPXB200 Pressure Independent Control Valve Assembly

Product Description

The Honeywell VRN2ESPXB200 is a pressure independent control valve assembly designed for efficient flow and temperature regulation. This valve features a pressure control cartridge that allows for precise flow balancing and control. It is constructed with a forged brass body and has NPT connections, making it suitable for various installations.

• Valve size: one and one-half inch NPT
• Flow rate: thirty-five gallons per minute
• Supply voltage: twenty-four VAC

Product Highlights

Utilizing Honeywell direct-coupled actuators, this valve is designed for use with hot or chilled water and glycol solutions up to fifty percent.

Product Information

Standard Information

• Brand: Honeywell
• MPN: VRN2ESPXB200

Technical Specifications

• Type: Assembly
• Connection: NPT
• Input Voltage: 24 VAC
• Trim Material: Stainless Steel
• Pattern: 2-way
• Size: one and one-half inches
• GPM: thirty-five gallons per minute
• Control Signal: Analog, Floating
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: one-half inch to three inches with female NPT pipe fittings
• Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or Glycol solutions up to fifty percent; not suitable for combustible gases, oil or steam
• Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: one GPM (one-half inch valve) to ninety-five GPM (three inch valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (Ball and Stem): Nickel-chrome plated brass or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at one-half inch or three-quarters inch (DN15 ~ DN20)
• Minimum Torque Required: thirty-five lb-in (4 Nm) up to three inches (DN80), eighteen lb-in (2 Nm) up to three-quarters inch (and one inch up to nine GPM)
• Warranty: one year on valves, five years on actuators