Honeywell VRN2EQPX6200 Pressure Independent Control Valve

Product Description

The Honeywell VRN2EQPX6200 is a pressure independent control valve featuring an electric actuator. This valve controls flow and temperature in hydronic systems, maintaining temperature even with fluctuating piping pressures.

• Features a one and one-half inch NPT connection.
• Designed for two-way flow control with a twenty-five GPM capacity.
• Compatible with modulating floating actuators and 24 VAC power.

Product Highlights

This valve is ideal for use in heating and cooling systems with hot or chilled water and glycol solutions up to fifty percent.

Product Information

Standard Information

• Manufacturer Part Number: VRN2EQPX6200
• Valve Type: Dynamic Pressure Regulated Control Valve

Technical Specifications

• Connection: NPT
• Pattern: Two-way
• Size: 1-1/2 inch
• GPM: 25 GPM
• Control Signal: Analog, Floating
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings
• Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil, or steam
• Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
• Close-off pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80) and 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)
• Warranty: 1 year on valves, 5 years on actuators.